China Zori International Commerce Wuxi Co., Ltd. Company News

Now many people's homes are still cement floor, in order to make the ground more beautiful, they will choose to use the floor leather this material. Compared with wood flooring, it has a clear natural texture of wood flooring, and its price is more affordable, it can be said that floor leather is a substitute for wood flooring. Floor leather is not only beautiful, but also has the characteristics of sound insulation, moisture resistance, wear resistance and corrosion resistance. How to stick the concrete floor leather?       1. Before laying, we need to use a professional measuring ruler to measure the size of the room floor and make relevant records, and then cut the floor leather according to the measured size. It should be noted that the width of the cutting of the floor leather should be slightly greater than the required width, in order to facilitate the overlap and trimming when laying. For the cut floor leather should be placed at a room temperature of not less than 15 ° C for about 24 hours, so that the curled part of the floor leather can be fully extended to prepare for the placement.   2. Before laying, we need to clean up the ground, remove garbage and other debris, and clean up if there is oil or dust. Only after the ground is flat, clean and dry, can you apply glue. When laying, we should use a special binder to ensure that it has enough viscosity. When laying, we should ensure its flatness, for the convex place we should shovel and grind flat, the concave place can be 107 glue and cement to 1:2 weight ratio into paste, with a spatula to flatten, dry and then sandpaper.   3. Secondly, we need to use a special scraper to evenly spread the glue on the ground. At this time, we can not paint all the glue at once, the correct approach should be to paint a piece of paving a piece, in this order. When pasting should pay attention to align the edge line, when using a long handle brush to push out the pressure. And in the seam of the floor leather, a width of 10 cm should be left without glue to facilitate the treatment of the seam.   4. Finally, we need to use a special ruler to align it with the overlap, and then cut along the excess part with a knife, remove the cut edge, brush the appropriate amount of glue on the joint with a paint brush, and then close the joint with a press roller. The residual glue extruded at the joint should be wiped clean so as not to affect the beauty of the ground. At the same time, we should also check whether there are bubbles on the good floor leather and whether it is smooth. If there are bubbles, you can insert a syringe to suck out the air, and then compact.  

Is plastic flooring toxic? 1. Sports plastic floor (non-toxic, does not cause harm to the human body): mainly used in buses, trains (bullet trains and high-speed rail), stadiums, large public places (passenger stations, high-speed rail stations). 2. Commercial plastic floor (non-toxic, does not cause harm to the human body): mainly used in schools (kindergartens and primary schools), hospitals, KTV, hotels, etc. 3. Floor leather (heavy metals may exceed the standard): This type of floor is mainly black or dark red. Because it is cheap, it has been mass-produced and applied in our country since the 1980s. Especially in the three provinces of Northeast China, a large number of people are useful at home, due to price restrictions, some may exceed the limit of heavy metals, it is best not to use in the skin will be exposed to the place, let alone to placemats.     The main advantages of PVC plastic flooring: 1. Light weight: General PVC plastic floor weight is 2-3 kg/square meter, less than 10% of the ordinary ground, in high-rise buildings for building load bearing and space saving has unparalleled advantages. 2. Environmental protection: The main raw material of general PVC plastic flooring is polyvinyl chloride, which is an environmentally friendly and non-toxic renewable resource, compared with harmful substances such as formaldehyde of wood flooring, its environmental performance has an absolute advantage. 3. High elasticity, impact resistance :PVC plastic floor texture is soft, so the elasticity is very good, under the impact of heavy objects has good elastic recovery, so it can greatly reduce the personnel slip to fall injury, while the impact of heavy objects also has good elastic recovery, will not cause damage. 4. Non-slip :PVC plastic floor has the characteristics of astringent water, and the general PVC plastic floor has been made non-slip treatment (wear-resistant layer pattern). 5. Waterproof: the main component of PVC plastic floor is polyvinyl chloride, so it is naturally not afraid of water, as long as it is not soaked for a long time it will not be damaged. 6 Sound absorption :PVC plastic floor sound absorption can reach 20 decibels, so in the need for quiet environment such as hospital wards, libraries, lecture halls and other places to choose PVC plastic floor, you do not need to worry about the sound of high heels. 7. A wide variety of colors :PVC plastic flooring can be processed into a large number of colors and patterns, so the user's pattern has a wider range of options, and can achieve personalized customization. 8. Easy construction and installation: the better utility knife can be cut arbitrarily, the construction can be simple splicing, and it can also be seamless welding. 9. High cost performance: much cheaper than professional wood flooring, but the performance is better.

What is a wear layer? To answer this question simply, the wear layer is basically the thickness of hardwood that sits on top of the multiply core for engineered wood flooring. These two elements combined present you with an engineered wooden floor. The wear layer can vary in thickness from as thin as 2mm up to 6mm. A thicker wear layer contributes to a floor lasting longer as it can be sanded many more times. When you think of solid wood flooring, although it is solid, the boards can still only be worn down to a certain point. In the case of solid this would be the tongue and groove. Once worn down to this point the flooring would last no longer. The distance from the top of the tongue to the top surface of a solid wood board would vary but generally speaking on an 18mm thick solid oak board it would be around 6mm. Therefore if you purchased an engineered board with a 6mm wear layer， it would have the same life expectancy as a solid floorboard.     How long does the wear layer last? As we established the thicker the wear layer the more times the floor can be re-sanded and therefore the longer it will last. This being said how long a floor will last until it needs sanding is entirely dependent on what its treated with and how you look after it. Even a 2-3mm wear layer will last decades if treated and maintained properly. Before you purchase your floor make sure you consider how durable the finish is that you are purchasing and applying. It is very important that you know how to clean and maintain it as this will help keep it looking its best. Keep this in mind especially if you are laying the floor into a particularly busy room in your house, as after many years of constant use you will wear through the finish, and having the ability to replenish the boards can prove to be very helpful. Many people choose to treat their floor with quality products such as hardwax oil once the flooring has been laid. This will give the floor a very durable finish and also a finish that is easily cleaned, maintained and replenished.       What wear layer is necessary for your property? The overall thickness of a board and the wear layer of a board are very much linked as generally speaking the thicker the board is, the thicker the wear layer is. For example if you take a look at our 14mm thick ‘Country’ range it has a 3mm wear layer of oak whereas our 21mm thick ‘Supreme’ range has a 6mm wear layer of oak. Depending on the surface you are laying onto you must be cautious of the thickness you are purchasing, for example if you were spanning joists your flooring would need to be structural and therefore any flooring less than 21mm thick would not be suitable meaning you would have no choice but to go for a board with a 6mm wear layer. If you were laying onto a solid surface such as plywood, chipboard, concrete etc. then you are not restricted in terms of needing such a thick board. You may still have an issue though in terms of height. It may be that you cannot go any thicker than a 15mm thick board and therefore you would have to rule out going for a board with a 6mm wear layer. If you are not restricted for any of these reasons then it’s always hard to say what thickness of wear layer you should go for as any hardwood floor will last decades if looked after properly. Of course a thinner board with less of a wear layer will be cheaper but not by a huge amount. This can of course add up to be quite a saving but often isn’t enough for people to sacrifice the extra thickness and wear layer.

Persistence Market Research has projected the global decorative films and foils market to grow at a CAGR of over 5% during the forecast period 2021-2031. The furniture and door&window industries have a large share, accounting for nearly three quarters of the consumption of decorative films and foils. Other applications include floor coverings, automotive interiors and exteriors. Decorative films and foils are popular in many regions, not only for their aesthetic appeal, but also because they can reduce the need for lighting by more than 50 %. Key Takeaways from Decorative Films and Foils Market Study • Polyvinyl chloride (PVC) accounted for more than 45% of the global decorative films and sheets market and this trend is expected to continue over the forecast period. • Furniture is the most attractive use, with a share of over 40 per cent, followed by windows and doors. However, flooring is expected to grow faster than all other uses. • China dominates the global decorative films and foils market and is expected to register the highest growth rate due to increasing construction activity. Europe holds a significant share due to high demand from the furniture industry, especially in Germany. • Energy efficiency and benefits due to the physical properties of decorative window films are some of the key market drivers. • The market in China is slated to expand at an impressive CAGR of over 6% through 2031, while that of the U.K. and U.S. is expected to witness 5.7% and 5.1% growth, respectively.   Market Landscape Continues to Remain Fairly Fragmented The global decorative films and foils market is segmented into global and regional levels. Some of the key players profiled in this report include LG HAUSYS, Ltd, LLC, OMNOVA Solutions, Inc. Group, Folienwerk Wolfen GmbH, Mondoplastico S.p.A., RENOLIT, AVI Global Plast Pvt. Ltd. and others. To gain a competitive edge in the market, players are engaging in expansion, merger, and acquisition activities in the rapidly growing market. Demand for decorative films and foils is expected to grow moderately, driven by increased consumption for furniture. Among other applications, fenestration is expected to grow at a high rate. Asia and Europe are expected to account for the major share, followed by North America. China, Germany, the US, India, and South Korea are the major suppliers of decorative films and foils. Overall, the market is highly competitive, with a large number of small and medium-sized enterprises in every region.

ROSEMONT, Ill.--(BUSINESS WIRE)--Appvion, a Wynnchurch Capital, L.P. (“Wynnchurch”) portfolio company, announced the addition of Decorative Films, LLC (“Decorative Films” or the “Company”) to the platform.   Headquartered in Frederick, Maryland, the Company manufactures commercial and residential decorative, privacy protection and functional window film and distributes it through a global network of distributor partners. Winchatch invested in November 2022 in Nekoosa Coated Products, LLC ("Nekoosa"). “I am honored to partner with the entire Decorative Films team,” said Paul Charapata, Appvion CEO. “Decorative Films is a leader in the window films market due to the broad and innovative portfolio of products they have created and strong partnerships they have built. They are first class people running a best-in-class operation.”   Peter Huyser, founder of Decorative Films, said in a statement, “We believe that our new partnership will provide exceptional support and resources as well as expand Decorative Films product line with new and innovative films for all of our incredible customers worldwide.” “We are excited to partner with the Decorative Films team as we continue building the Appvion platform and increase our value proposition to customers,” said Greg Gleason, Managing Partner at Wynnchurch.     The acquisition reflects our market leadership in media and technology solutions and our desire to grow through strategic acquisitions that bring value to all stakeholders.   “With the incredible support of Wynnchurch, we have completed two significant acquisitions and invested nearly $20 million in growth focused capital projects over the last six months. We have a very strong business platform that is positioned for strong growth,” added Paul Charapata.

PVC floor is based on polyvinyl chloride and its copolymer resin as the main raw materials, adding fillers, plasticizers, stabilizers, colorants and other auxiliary materials, on the sheet continuous substrate, by coating process or by calendering, extrusion or extrusion process production. Polyvinyl chloride, or PVC, this material has no affinity with water and is often used as a waterproof material. Therefore, the PVC floor also has excellent waterproof ability, and the foot will feel more astringent when it encounters water! So can PVC flooring be used outdoors? Or to make the roof waterproof?   PVC flooring cannot be used outdoors! When used outdoors, not only the service life will be shortened, but also various phenomena such as fading, drumming, etc., because the outdoor environment and indoor are different, such as sunlight exposure, ultraviolet light, temperature, rain and snow weather and other factors should be taken into account, and what is usually called weather resistance.   PVC is a product with poor weather resistance. A change from white to brown usually occurs. Of course, in the outdoor natural environment, the most is yellow. In addition, PVC floor is not resistant to high temperature, afraid of cigarette butts.   Multi-layer composite PVC floor is a multi-layer structure, generally composed of 4 to 5 layers of structure laminated, wear-resistant layer (including UV treatment), printing film layer, glass fiber layer, substrate layer and so on. If this multi-layer composite floor is used outdoors, the color of the floor will become lighter and distorted, the luster will disappear, and the color will become lighter. There may not be a problem in the short term, but within a year there will be all kinds of anomalies.     Homogeneous transcore PVC floor is homogenous transcore, not layered in structure. From top to bottom, from top to bottom, it's the same color. You can't use this outside, either. If spread outdoors, due to light, rain and other factors, the color will soon change, and will change other patterns (uneven fading), it is very ugly.   In addition, when the PVC floor is resistant to discoloration, there is another problem that it becomes brittle. Due to the rain, it will accelerate the aging of plastics, make PVC floors brittle, and even crack, and the ability to resist impact decreases sharply. To sum up: PVC floor can not be used outdoors, if used outdoors will appear discoloration, brittleness, beauty and service life will be greatly reduced. Therefore, the PVC floor should not only prevent long-term soaking of water during use, but also avoid paving in places where there is often direct sunlight.

Most homeowners are planning to renovate their homes this year! However, some people think too much about the cost of renovations. Fortunately, there are ways to freshen up your home on a budget! A common misconception is that upholstered furniture and window film are basically the same thing. The truth is, while they may look similar, they serve different purposes. So, before we get into the benefits of decorative window film, let's talk about the differences. Decorative Films or Window Films The former is mainly used to enhance the aesthetics of your home while ensuring privacy. They're commonly used in bathrooms, front doors, home theatres, and more! The latter are used to increase safety, such as UV and infrared protection. If you want to add some personality to your home, decorative film is the best option. It's easy to cut into different shapes and comes in a variety of colours and patterns. Depending on how you want to decorate your home, you have many options to choose from. They're also relatively inexpensive compared to curtains or blinds! However, if you're worried about the safety of your home, there are different types of window film designed for specific purposes. It's also important to note that most of the colourful window films are sold in muted colours. After all, the purpose of window films is protection, not aesthetics. While it's true that window film is the best solution for enhancing home security, decorative window film provides ample protection and privacy from harmful UV rays!   Why Your Home Deserves It Decorative window films can affordably transform glass surfaces into works of art. Homeowners can also rest assured that it will not block natural light from entering their home. If you are still unsure whether decorative window film is worth using, check out some key benefits!   Adds Color to Your Life The windows in your home don't have to be boring and you don't have to spend money on stained or engraved glass. Decorative film can add colour to your life at little expense. As mentioned above, you can choose from a variety of colours, patterns and designs. They are not too flashy and look almost identical to etched glass, which can add character to your decor.   Adds Protection Most window films are used for aesthetic purposes, but they also function to protect the home. For example, translucent window films can prevent other people from looking into your home. They also protect against harmful UV rays that increase the risk of skin cancer.   Lessens Energy Use As with window films, decorative films can be used as additional window insulation. It keeps homes warmer in winter and cooler in summer. This reduces heating and cooling consumption. If homeowners decide to refurbish their homes with decorative window film, they can get much more value for money.   Static Cling and Adhesives Many people do not realize that decorative films can be fixed in two ways: electrostatically or self-adhesively. This often makes it difficult for homeowners to choose between the two. We have therefore summarised the pros and cons of these two methods!   Static Cling The term "cling" refers to the process of attaching a degradable vinyl material to a glass surface using alternative bonding methods. Contrary to popular belief, electrostatic curing methods do not use static electricity to bond vinyl. Instead, the highly laminated thin film reacts like a suction cup when pressed against a surface with the same cohesive force. This makes it easy to apply to smooth surfaces such as windows and glass facades. Despite the thick material, electrostatic adhesive films are usually cheaper than adhesives with lower bonding strength. In addition, because no adhesive is used, the film can be re-used if properly managed by the homeowner. While it is true that the initial cost to the homeowner is lower, anti-static films often have a short lifespan. Over time, the film may peel off and become unusable without prolonged use, and customers may need to spend more on re-installation.   Adhesive-based The application of adhesive decorative film is similar to the application of window film, but messier and more complicated. However, the good news is that it lasts longer than fixed stickers. Prices can be considerably higher, but will save you money in the long run! Adhesives can be used on a variety of surfaces and have excellent adhesive strength. You don't have to worry about using them on different types of windows. They can also withstand different environmental conditions, depending on the specifications! As mentioned above, self-adhesive films can be quite difficult to install. Unlike self-adhesive film, once applied it cannot be moved, so most people recommend professional installation.  

PVC decorative film is a thin, flexible plastic material often used in a variety of decorative applications. It is an inexpensive and easy-to-install option for adding a decorative touch to furniture and floors. Plastic film can therefore be used for PVC furniture and floor films.PVC decorative film is not only inexpensive, but also durable and hard-wearing, making it ideal for high-traffic areas.   Here are some key features and uses of PVC decorative film for floors: Aesthetic Appeal: The primary purpose of this film is to enhance the visual appeal of the flooring. It can replicate the look of different natural materials, allowing consumers to achieve the desired aesthetic in their homes or commercial spaces.   Durability: PVC is known for its durability and resistance to wear and tear. The film serves as a protective layer for the flooring, making it more robust and long-lasting.   Easy Maintenance: Vinyl flooring with PVC decorative film is generally easy to clean and maintain, making it a popular choice for homes, offices, and commercial spaces.   Cost-Effective: PVC decorative film can provide a cost-effective alternative to natural materials like hardwood or stone, without compromising on aesthetics.   Variety of Designs: Manufacturers offer a wide range of design options, including various colors, patterns, and textures, allowing customers to choose a look that suits their preferences and decor.   Waterproof or Water-Resistant: Many vinyl flooring products with PVC decorative film are water-resistant or even waterproof, which is ideal for areas prone to moisture, such as kitchens and bathrooms.   DIY-Friendly: Some vinyl flooring products are designed for easy installation as a DIY project, making them accessible to a wide range of consumers.   One of the main advantages of PVC decorative film is that it is widely used. It can be used to decorate a wide range of surfaces, including wood, metal glass and plastic. And with a variety of colors, patterns and textures available, it is easy to find a style that suits your needs.   PVC decorative film is typically used in the construction of luxury vinyl tile (LVT) or luxury vinyl plank (LVP) flooring. It plays a crucial role in creating the realistic appearance of these types of flooring while providing durability and protection. Overall, PVC decorative film for floors is a versatile and popular choice for those seeking attractive and practical flooring options.   All customers choose their preferred LVT/LVP PVC flooring according to their interior design. Most people consider the choice of colour to be far more important than size, and interior designers should pay more attention to the colour of the flooring to make it more coordinated.

MARKET INTRODUCTION A decorative film is a thin laminate film with a clear or colored pattern, which can be applied to substrate materials' exterior or interior surfaces. A decorative foil is an infused paper product that consists of a paper base printed with the rotogravure system and laminated with polymer resin materials such as PET. Decorative films and foils are used for wood and glass, apart from others; however, they also find applications for other substrates such as wood. Decorative films are available with a variety of colors, transparency, patterns, and textures.   MARKET DYNAMICS The decorative films and foils market has witnessed significant growth due to rising demand for the automotive industry. Moreover, the increasing R&D activities provide a huge market opportunity for the key players operating in the decorative films and foils market. However, strict government regulations are projected to hamper the overall growth of the decorative films and foils market.   MARKET SCOPE The "Global Decorative Films and Foils Market Analysis to 2028" is a specialized and in-depth study of the chemical and materials industry with a special focus on the global market trend analysis. The report aims to provide an overview of the decorative films and foils market with detailed market segmentation material type, application, and geography. The global decorative films and foils market is expected to witness high growth during the forecast period. The report provides key statistics on the market status of the leading decorative films and foils market players and offers key trends and opportunities in the market.   MARKET SEGMENTATION The global decorative films and foils market is segmented on the basis of material type and application. On the basis of material type, the global decorative films and foils market is divided into polyvinyl chloride, polyester, polypropylene, and vinyl. On the basis of application, the global decorative films and foils market is divided into furniture, doors & windows, flooring, and automotive interior & exterior.   REGIONAL FRAMEWORK The report provides a detailed overview of the industry including both qualitative and quantitative information. It provides an overview and forecast of the global decorative films and foils market based on various segments. It also provides market size and forecast estimates from the year 2020 to 2028 with respect to five major regions, namely;North America, Europe, Asia-Pacific (APAC), Middle East and Africa (MA) and South America. The decorative films and foils market by each region is later sub-segmented by respective countries and segments. The report covers the analysis and forecast of 18 countries globally along with the current trend and opportunities prevailing in the region.   The report analyzes factors affecting the decorative films and foils market from both demand and supply side and further evaluates market dynamics affecting the market during the forecast period i.e., drivers, restraints, opportunities, and future trend. The report also provides exhaustive PEST analysis for all five regions namely; North America, Europe, APAC, MEA, and South America after evaluating political, economic, social and technological factors affecting the decorative films and foils market in these regions.   MARKET PLAYERS The reports cover key developments in the decorative films and foils market as organic and inorganic growth strategies. Various companies are focusing on organic growth strategies such as product launches, product approvals and others such as patents and events. Inorganic growth strategies activities witnessed in the market were acquisitions, and partnership & collaborations. These activities have paved way for the expansion of business and customer base of market players. The market players from decorative films and foils market is anticipated to lucrative growth opportunities in the future with the rising demand for decorative films and foils in the global market. Below mentioned is the list of few companies engaged in the decorative films and foils market.   The report also includes the profiles of key companies along with their SWOT analysis and market strategies in the decorative films and foils market. In addition, the report focuses on leading industry players with information such as company profiles, components, and services offered, financial information of the last 3 years, the key development in the past five years. Avery Denisson Corporation AVI Global Plast Pvt. Ltd Ergis Group Klockner Pentaplast Group LG Hausys, Ltd. Macro Plastic Sdn. Bhd Mondoplastico S.p.A Omnova Solutions Peiyu Plastic Corporation Renolit The Insight Partner's dedicated research and analysis team consist of experienced professionals with advanced statistical expertise and offer various customization options in the existing study.

What is decorative film for floor? Decorative film for floors is a type of material used to enhance the appearance and aesthetics of flooring surfaces. It is often used as an alternative to traditional flooring materials like hardwood, tile, or laminate. Decorative film is typically made from a thin, flexible sheet of PVC (polyvinyl chloride) or other synthetic materials that can be printed with various patterns and designs. These designs can mimic the look of natural materials such as wood, stone, or tile.   Here are some key features and uses of decorative film for floors: Aesthetic Enhancement: Decorative films are used to add visual appeal to floors. They can create the appearance of high-end finishes at a fraction of the cost of genuine materials.   Versatility: These films can be applied to a variety of existing flooring surfaces, including concrete, vinyl, or plywood. They are also used in the manufacture of luxury vinyl tile (LVT) and luxury vinyl plank (LVP) flooring.   Ease of Installation: Installing decorative film is generally less labor-intensive and quicker than installing traditional flooring materials. It can be a DIY project or done by professionals.   Durability: Quality decorative films are designed to be durable and resistant to wear, scratches, and moisture. They provide a protective layer to the underlying floor.   Cost-Effective: Using decorative film can be a cost-effective way to achieve a desired look without the expense of real hardwood, stone, or tile flooring.   Design Options: There are numerous design options available, ranging from realistic wood grains and stone patterns to abstract and custom designs. This allows homeowners and designers to get creative with their flooring choices.   Easy Maintenance: Decorative film floors are generally easy to clean and maintain. They don't require the same level of care as some natural flooring materials.   Commercial and Residential Use: Decorative film can be used in both residential and commercial settings, including homes, offices, retail spaces, and more.   It's important to note that while decorative film for floors offers many advantages, the quality of the material and installation are crucial factors in its performance and longevity. It's advisable to consult with professionals or manufacturers to ensure the best results and durability for your specific flooring project.