quality SPC Wear Layer & Wear Resistant Layer manufacturer

Now many people's homes are still cement floor, in order to make the ground more beautiful, they will choose to use the floor leather this material. Compared with wood flooring, it has a clear natural texture of wood flooring, and its price is more affordable, it can be said that floor leather is a substitute for wood flooring. Floor leather is not only beautiful, but also has the characteristics of sound insulation, moisture resistance, wear resistance and corrosion resistance. How to stick the concrete floor leather?       1. Before laying, we need to use a professional measuring ruler to measure the size of the room floor and make relevant records, and then cut the floor leather according to the measured size. It should be noted that the width of the cutting of the floor leather should be slightly greater than the required width, in order to facilitate the overlap and trimming when laying. For the cut floor leather should be placed at a room temperature of not less than 15 ° C for about 24 hours, so that the curled part of the floor leather can be fully extended to prepare for the placement.   2. Before laying, we need to clean up the ground, remove garbage and other debris, and clean up if there is oil or dust. Only after the ground is flat, clean and dry, can you apply glue. When laying, we should use a special binder to ensure that it has enough viscosity. When laying, we should ensure its flatness, for the convex place we should shovel and grind flat, the concave place can be 107 glue and cement to 1:2 weight ratio into paste, with a spatula to flatten, dry and then sandpaper.   3. Secondly, we need to use a special scraper to evenly spread the glue on the ground. At this time, we can not paint all the glue at once, the correct approach should be to paint a piece of paving a piece, in this order. When pasting should pay attention to align the edge line, when using a long handle brush to push out the pressure. And in the seam of the floor leather, a width of 10 cm should be left without glue to facilitate the treatment of the seam.   4. Finally, we need to use a special ruler to align it with the overlap, and then cut along the excess part with a knife, remove the cut edge, brush the appropriate amount of glue on the joint with a paint brush, and then close the joint with a press roller. The residual glue extruded at the joint should be wiped clean so as not to affect the beauty of the ground. At the same time, we should also check whether there are bubbles on the good floor leather and whether it is smooth. If there are bubbles, you can insert a syringe to suck out the air, and then compact.  

Is plastic flooring toxic? 1. Sports plastic floor (non-toxic, does not cause harm to the human body): mainly used in buses, trains (bullet trains and high-speed rail), stadiums, large public places (passenger stations, high-speed rail stations). 2. Commercial plastic floor (non-toxic, does not cause harm to the human body): mainly used in schools (kindergartens and primary schools), hospitals, KTV, hotels, etc. 3. Floor leather (heavy metals may exceed the standard): This type of floor is mainly black or dark red. Because it is cheap, it has been mass-produced and applied in our country since the 1980s. Especially in the three provinces of Northeast China, a large number of people are useful at home, due to price restrictions, some may exceed the limit of heavy metals, it is best not to use in the skin will be exposed to the place, let alone to placemats.     The main advantages of PVC plastic flooring: 1. Light weight: General PVC plastic floor weight is 2-3 kg/square meter, less than 10% of the ordinary ground, in high-rise buildings for building load bearing and space saving has unparalleled advantages. 2. Environmental protection: The main raw material of general PVC plastic flooring is polyvinyl chloride, which is an environmentally friendly and non-toxic renewable resource, compared with harmful substances such as formaldehyde of wood flooring, its environmental performance has an absolute advantage. 3. High elasticity, impact resistance :PVC plastic floor texture is soft, so the elasticity is very good, under the impact of heavy objects has good elastic recovery, so it can greatly reduce the personnel slip to fall injury, while the impact of heavy objects also has good elastic recovery, will not cause damage. 4. Non-slip :PVC plastic floor has the characteristics of astringent water, and the general PVC plastic floor has been made non-slip treatment (wear-resistant layer pattern). 5. Waterproof: the main component of PVC plastic floor is polyvinyl chloride, so it is naturally not afraid of water, as long as it is not soaked for a long time it will not be damaged. 6 Sound absorption :PVC plastic floor sound absorption can reach 20 decibels, so in the need for quiet environment such as hospital wards, libraries, lecture halls and other places to choose PVC plastic floor, you do not need to worry about the sound of high heels. 7. A wide variety of colors :PVC plastic flooring can be processed into a large number of colors and patterns, so the user's pattern has a wider range of options, and can achieve personalized customization. 8. Easy construction and installation: the better utility knife can be cut arbitrarily, the construction can be simple splicing, and it can also be seamless welding. 9. High cost performance: much cheaper than professional wood flooring, but the performance is better.

PVC floor is based on polyvinyl chloride and its copolymer resin as the main raw materials, adding fillers, plasticizers, stabilizers, colorants and other auxiliary materials, on the sheet continuous substrate, by coating process or by calendering, extrusion or extrusion process production. Polyvinyl chloride, or PVC, this material has no affinity with water and is often used as a waterproof material. Therefore, the PVC floor also has excellent waterproof ability, and the foot will feel more astringent when it encounters water! So can PVC flooring be used outdoors? Or to make the roof waterproof?   PVC flooring cannot be used outdoors! When used outdoors, not only the service life will be shortened, but also various phenomena such as fading, drumming, etc., because the outdoor environment and indoor are different, such as sunlight exposure, ultraviolet light, temperature, rain and snow weather and other factors should be taken into account, and what is usually called weather resistance.   PVC is a product with poor weather resistance. A change from white to brown usually occurs. Of course, in the outdoor natural environment, the most is yellow. In addition, PVC floor is not resistant to high temperature, afraid of cigarette butts.   Multi-layer composite PVC floor is a multi-layer structure, generally composed of 4 to 5 layers of structure laminated, wear-resistant layer (including UV treatment), printing film layer, glass fiber layer, substrate layer and so on. If this multi-layer composite floor is used outdoors, the color of the floor will become lighter and distorted, the luster will disappear, and the color will become lighter. There may not be a problem in the short term, but within a year there will be all kinds of anomalies.     Homogeneous transcore PVC floor is homogenous transcore, not layered in structure. From top to bottom, from top to bottom, it's the same color. You can't use this outside, either. If spread outdoors, due to light, rain and other factors, the color will soon change, and will change other patterns (uneven fading), it is very ugly.   In addition, when the PVC floor is resistant to discoloration, there is another problem that it becomes brittle. Due to the rain, it will accelerate the aging of plastics, make PVC floors brittle, and even crack, and the ability to resist impact decreases sharply. To sum up: PVC floor can not be used outdoors, if used outdoors will appear discoloration, brittleness, beauty and service life will be greatly reduced. Therefore, the PVC floor should not only prevent long-term soaking of water during use, but also avoid paving in places where there is often direct sunlight.